Perdue - Ready to Press DTF iron on Transfer

Purdue - Ready to Press DTF Iron on transfer
THIS IS NOT A PATCH OR EMBROIDERY.

See our Sports Logo Listing for other Team logos—too many to list.

- Inches are by longest edge (width)

You will receive a FILM with an Image to transfer onto a garment.
The garment pictured is not included.

HEAT PRESS:
Pre-press garment for 5 sec.
Place film onto the garment with the printed side down
Cover the film with a Teflon sheet or parchment paper.
Press for 15 sec, FIRM PRESSURE
Let cool for 30 seconds or more (COOL PEEL)
Remove film. While you peel off the film and notice it is not adhering to the garment, STOP peeling and place the film back down and re-press. Please be cautious to not melt film or garment.

Regular Iron:
Important -----TURN OFF STEAM!!!!
DO NOT DRAG IRON ACROSS FILM!!
Turn the iron to the Highest heat settings usually COTTON
Pre-press garment for 5 sec.
Place film onto the garment with the printed side down
Cover Image film with a Teflon sheet (if you don't have one you can use a thin cotton pillowcase or sheet).
Press for 10-15 sec, FIRM PRESSURE
Let cool for 30 seconds or more (cool peel)
Remove film.
NOTE:
While you peel off the film and notice it is not adhering to the garment, STOP peeling and place the film back down and re-press. Please be cautious to not melt film or garment.

Wait 24 hours before washing.

WE ARE NOT RESPONSIBLE FOR DAMAGES.